Skip to main content Skip to search Skip to main navigation
Menu
Description

Universal hanging table for the sliding door

The additional table for the sliding door fits on both the driver's and passenger's side and can be attached quickly and easily.

It fits perfectly, e.g. for a cartridge stove or small camping stoves.

With its compact dimensions (size 400 x 280 mm, W x D), it easily fits in the drawers of the three-seater sleeping bench or under the two-seater bench in the VW California. It can also be stowed between the chairs in the tailgate.

Exterior table for your van camper

As a genuine camping table it can of course remain attached even when the sliding door is closed.

You can adjust it to your desired height using a strap or rope.

Our van bar fits VW T1 T2, T3, T4, T5, T6 and T6.1; no matter if it's a California, Caravelle, Transporter or Multivan.
It also adds extra surface quickly on the Mercedes Marco Polo, Pössl Campster or Hymer Crosscamp and other campervans.

You don’t have a flange or only a sloped edge on your motorhome? Use magnets or (maybe suction cups from the "cap" for a pop-up roof?) and the practical shelf fits any door.

It just fits!

Thoughtful hanging board details...

For edge protection and to protect your paintwork, simply guide the rope or strap around the specially made long holes on the outside.

We deliberately left the sides open: This way, you can easily sweep or wipe away crumbs and more – and if the camping table gets caught in a shower – it won't create a puddle at the door ;)

The long slots in the middle of the tabletop hold additional accessories. These then find a weather-protected place under the table.

Below a table as a cooking surface, above a shelf with an extra compartment suspended from the sliding door.
For even more space ... on top of each other or next to each other ... simply combine two tables.

 

Scope of delivery for the universal hanging table

PIT consists of the tabletop made from 6 mm thick birch multiplex.

We oil every table with linseed oil. If you want to paint, glaze or leave it unoiled ... just let us know briefly in the comment field when ordering.

For mounting, you can use rope or a strap up to 25 mm wide. Matching sets for table mounting including hooks for the door, which still allow it to close (!), can be found right here.

Properties
Length280,00 mm
Width400,00 mm
Height6,00 mm
Weight 462 g
Material: Wood, Multiplex
Suitable vehicles: Ford Transit Custom, Nugget, Kompanja Campingbus, Mercedes Marco Polo, Pössl Campster, Renault Trafic, SpaceCamper Limited, VW Caddy, VW ID.BUZZ, VW Multivan ("T7"), VW Multivan California ("T7"), VW T4, VW T5, VW T5 California Beach, VW T5 California Comfortline, VW T5 Caravelle, VW T5 Multivan, VW T5 Transporter, VW T6, VW T6 California Beach, VW T6 California Coast, VW T6 California Ocean, VW T6 Caravelle, VW T6 Multivan, VW T6 Transporter, VW T6.1, VW T6.1 California, VW T6.1 California Beach, VW T6.1 California Beach Camper, VW T6.1 California Beach Tour, VW T6.1 California Coast, VW T6.1 California Ocean, VW T6.1 Caravelle, VW T6.1 Multivan, VW T6.1 Transporter, VW new Transporter
Manufacturer

VANZEIT®

#organiceyourvan in no time at all: Plug-And-Camp set-up for your campervan.
Universal outdoor table, hanging table Van Camper sliding door Manufacturer number: 421300800103

Still got questions about the product? Write us.

Illustrations and photos are similar, subject to change and errors excepted.

The VANZEIT ® Difference?

We think different.

Instead of average, with us, you get creative, practical, and durable setups from original ideas.

Our own camping experience is reflected in the attention to detail – and you’ll feel it – in every use.

Trust in expertise for a relaxed time in your van!

 
🕐 New Product Ideas

A missing coat hook in our first California led to my invention: THE well-known hook for the pop-up roof, our ABHÄNG.

Why drill into your bus? From my incomprehension of this and the limited headroom under the existing roof cabinets, our EINFACH was born.

Every idea matures between my own ears, from actual need and missing solutions.

🕑 Thoughtful Product Design

Initial sketches turn into prototypes.

Once I'm convinced, I construct it using CAD, based on the already specific dimensions.

The design is then implemented with 3D printing and in the workshop, then being tested.

In the refinement process, I remove unnecessary parts from the design.

🕒Tested in Camping Life

Nicole and I take new accessories on tour directly with our bumblebee (aka T6 California Beach).

Is a contour not perfect, or is a feature not used while camping?

If so, it gets adjusted and tested again. And possibly again...

Only what convinces us over a season and proves its value gets produced.

🕓 Made in Northern Germany

We found our production partners within a few kilometers of us.

This guarantees short distances and quick, personal agreements by handshake.

Small series' production ensures fast adjustments, even with your suggestions.

🕔 Ensures More Freedom

Simple design integrates timelessly into your individual setup.

Focusing on the essentials gives you more space.

Less ballast means less fuel consumption. You go further.