Sink and table in campervan
Kitchen island behind front seats
Table and sink with worktop
Portable Potti in camper setup
Potti in front of camper bed
Sink and table in campervan
Kitchen island behind front seats
Table and sink with worktop
Portable Potti in camper setup
Potti in front of camper bed
2-in-1 Camping Combination Module Kitchen and Bathroom
Combine 2x Euro box 30 x 40 x 28 and 1x 12 cm in your camping module.
Water on top, cool box on the bottom, separating toilet plus gas stove, chuck box and fresh water ... your choice.
Tabletop fits on short or long side, as a work surface or camping table.
At 68 cm just as high as the California table – a perfect addition.
Easy in, quickly out. The floor anchors become support feet outdoors.
Even with a short wheelbase, you still have room to get in and out with the bed set up.
Length 362 mm, Width 462 mm, Height 680 mm,
Shop bewertet mit 5.0/5. FAQ - Your mostly asked questions
How are the modules connected to each other?
The plug-and-camp connection is made using our VANRAIL connectors.
There are four of them inserted in the upper module, fitting flush into the corner connectors of the lower one.
Where is it made?
All products are self-developed, personally used by us, and 100% practical.
Since 2016, our bus essentials are locally manufactured in Northern Germany. You can count on it 🤝
You can insert two Euro boxes with base dimensions of 30 x 40 cm and 28 cm height plus one up to 12 cm into the camping combo module.
Possible 2-in-1 combinations in the camping module
- Sink + separating toilet
- Cool box + cooking station
- Fresh water + cool box
- Stove + separating toilet
- ...
You can find the individual components ready-made from Boxio, Trobolo, KoMa or as a DIY project.
You can freely decide which block to use on top or bottom. Both components can be easily and securely combined with each other.
The additional storage box has space for cutlery, plates, toilet paper and more.
Includes camping table for indoor and outdoor use
The tabletop with 36 x 46 cm can be optionally attached to a short side – as an extended surface for cutting – or to a long side – e.g. as a workspace for your mobile office or for children to play.
We deliberately chose a height of 68 cm. This matches the height of the camping table in the VW California and the table rail in the Multivan and Beach.
Easy to install, quickly removable
The sturdy floor anchors securely fasten your custom combination to the floor rails of the VW bus or airline rails.
Knurled nuts with good grip are used for fastening. This way, you can easily install and quickly remove the combo module.
Outdoors, the total of 4 floor anchors become legs on which the module combination can stand securely.
Space for sitting and sleeping
Only 36 cm deep, the combo fits comfortably between the front seats and the rear bench seat. There is plenty of legroom.
If you use the sleeping bench at night, there's still plenty of room to get in and out next to the 46 cm width.
If you then place the upper block on one of the front seats, the toilet remains continuously usable.
Additional camping modules
A shower cabin is in the works.
Which block would you wish for?
VANZEIT®
#organiceyourvan in no time at all: Plug-And-Camp set-up for your campervan.Still got questions about the product? Write us.
Abbildungen sind ähnlich, Änderungen und Irrtümer vorbehalten.
The VANZEIT ® Difference?
We think different.
Instead of average, with us, you get creative, practical, and durable setups from original ideas.
Our own camping experience is reflected in the attention to detail – and you’ll feel it – in every use.
Trust in expertise for a relaxed time in your van!
🕐 New Product Ideas
A missing coat hook in our first California led to my invention: THE well-known hook for the pop-up roof, our ABHÄNG.
Why drill into your bus? From my incomprehension of this and the limited headroom under the existing roof cabinets, our EINFACH was born.
Every idea matures between my own ears, from actual need and missing solutions.
🕑 Thoughtful Product Design
Initial sketches turn into prototypes.
Once I'm convinced, I construct it using CAD, based on the already specific dimensions.
The design is then implemented with 3D printing and in the workshop, then being tested.
In the refinement process, I remove unnecessary parts from the design.
🕒Tested in Camping Life
Nicole and I take new accessories on tour directly with our bumblebee (aka T6 California Beach).
Is a contour not perfect, or is a feature not used while camping?
If so, it gets adjusted and tested again. And possibly again...
Only what convinces us over a season and proves its value gets produced.
🕓 Made in Northern Germany
We found our production partners within a few kilometers of us.
This guarantees short distances and quick, personal agreements by handshake.
Small series' production ensures fast adjustments, even with your suggestions.
🕔 Ensures More Freedom
Simple design integrates timelessly into your individual setup.
Focusing on the essentials gives you more space.
Less ballast means less fuel consumption. You go further.
